1. Met-L-Flo, Inc. joins with IMEC Made in Illinois program

    September 29, 2016

       Met-L-Flo, Inc. has recently partnered with IMEC to join the Made in Illinois program which helps promote local Illinois manufacturers. To learn more about this organization visit our page on the IMEC website. We are very proud to represent such a prestigious group that promotes the growth of businesses in our state. http://www.imec.org/Met-L-Flo.cfm          

  2. Additive Manufacturing Conference

    August 22, 2016

    Additive Manufacturing Conference at IMTS 2016Met-L-Flo, Inc. would like to invite you to the Additive Manufacturing Conference that will be co-located with IMTS at McCormick Place in Chicago. This event will be taking place on September 13th and 14th at the same location as the International Manufacturing Technology Show. We will be a silver sponsor […]

  3. Press Release: Met-L-Flo Adds New ROMER Absolute Arm 3D scanner

    August 4, 2016

    Press Release Contact: marketing@metlflo.com For Immediate Release630-409-9860 August 3, 2016www.metlflo.comMet-L-Flo, Inc. – ROMER Absolute Arm IntroducedMet-L-Flo has acquired a new 3D scanning arm. The addition of a ROMER Arm for accurate measuring and performing multiple inspection services. This scanning device retrieves precise measurements with less user error. This Arm can measure any type of part with […]

  4. Met-L-Flo, Inc. introduces its new outside sales team

    July 6, 2016

     Jeff Duncan: Business Development Manager for the Southeast region            Jeff earned a degree in Engineering Design & Technology from the University of Central Florida. After college his interest in 3D Technology led him to help build a Rapid Product Development, Rapid Prototyping, and Additive Manufacturing/3D printing Firm called Mydea. He helped grow the company to […]

  5. The Polimotor 2 Composite Engine Case Study

    June 22, 2016

    The Polimotor 2 engine has been invented by renowned automotive innovator Matti Holtzberg owner of Composite Castings in Florida where the concept began over 30 years ago. The original Polimotor engine was far beyond its time in regards to composites technology and 3-D printing. It was not completely made of plastics but started a new […]

  6. Press Release: Met-L-Flo, Inc. Launches New Website

    November 4, 2015

    Press Release Contact: marketing@metlflo.com For Immediate Release 630-409-9860 November 4, 2015 www.metlflo.comMet-L-Flo, Inc. – Launches New Website We’re thrilled to announce the launch of our new dynamic website. The website now reflects the many ways we’ve grown and expanded our service offerings to keep pace with exciting technological advancements in 3D Printing/Additive Manufacturing. The new […]

  7. comp

    The 3D Scanning of the Art Institute of Chicago Lions

    September 16, 2015

    Carl Dekker is at the Art Institute this morning for the 3D Scanning of a Chicago Lion by Exact Metrology. We’ll use the data captured from the scan to print approximately 300 small-scale replicas of the lion used as giveaways at FABTECH. We’re thrilled to participate in such an exciting undertaking. To find out more, […]

  8. Enter our Rafflecopter giveaway to win one of three great prizes!

    September 8, 2015

    Enter the Met-L-Flo Rafflecopter Giveaway!






  9. WallColl18-39

    Newsletter April 2014

    August 3, 2015

    Industry Activity: ASTM Intl F42 UpdateAs of February 2014, eight Additive Manufacturing industry standards have been or are in the process to be published by the ASTM Intl. Two of the eight standards are being published with the support of the International Standardization of Organization. These combined standards are one example of the global support […]

  10. IMG_7508

    SLS Parts & Valentine’s Day Trivia

    February 13, 2015

    We had some room on the SLS platform so we added a few fun Valentine’s Day themed parts found on Thingiverse.           Then I found another design… They still need some clean up, and a little color, but they will make fun key-chains. Download the Geared Heart File Here! Download the […]

@metlflo

"Have a Safe and Happy Labor Day! https://t.co/50tcopyMTj"

"Scanning for inspection or data capture https://t.co/HRkTLve3dt"

"See the Magic at MET-L-FLO - https://t.co/IeiKRlKeyQ"

"Does that mean no more potholes? :) https://t.co/YIuinDeSK1"

"Congrats Pat!! https://t.co/AzOUPkhLJ3"

View Summary

AS9100 Certified - ISO 9001:2008 RegisteredITAR Certified