The Polimotor 2 engine has been invented by renowned automotive innovator Matti Holtzberg owner of Composite Castings in Florida where the concept began over 30 years ago. The original Polimotor engine was far beyond its time in regards to composites technology and 3-D printing. It was not completely made of plastics but started a new […]
-
The Polimotor 2 Composite Engine Case Study
June 22, 2016Category: Case Study, Newsletter Comments (0)
-
Press Release: Met-L-Flo, Inc. Launches New Website
November 4, 2015Press Release Contact: marketing@metlflo.com For Immediate Release 630-409-9860 November 4, 2015 www.metlflo.comMet-L-Flo, Inc. – Launches New Website We’re thrilled to announce the launch of our new dynamic website. The website now reflects the many ways we’ve grown and expanded our service offerings to keep pace with exciting technological advancements in 3D Printing/Additive Manufacturing. The new […]
Category: Home
Tags: 3D Printing, Additive Manufacturing, Carl Dekker, Industry Activity, Manufacturing, Met-l-Flo, Rapid Prototyping, Website Launch | Comments (0) -
The 3D Scanning of the Art Institute of Chicago Lions
September 16, 2015Carl Dekker is at the Art Institute this morning for the 3D Scanning of a Chicago Lion by Exact Metrology. We’ll use the data captured from the scan to print approximately 300 small-scale replicas of the lion used as giveaways at FABTECH. We’re thrilled to participate in such an exciting undertaking. To find out more, […]
Category: Uncategorized
Tags: 3D, 3D Scanning, Art Institute of Chicago, Carl Dekker, Chicago, Chicago Lions, Ed Youdell, Exact Metrology, Fabtech, Fabtech Expo, Met-l-Flo, Reverse Engineering | Comments Off on The 3D Scanning of the Art Institute of Chicago Lions -
Enter our Rafflecopter giveaway to win one of three great prizes!
September 8, 2015Enter the Met-L-Flo Rafflecopter Giveaway!
Category: Home, Photos
Tags: Devils Skull, Giveaway, Met-l-Flo, Mythical Cat, Rafflecopter, Selective Laser Sintering, SLS, T-800 Redux, Thingiverse | Comments (0) -
Newsletter April 2014
August 3, 2015Industry Activity: ASTM Intl F42 UpdateAs of February 2014, eight Additive Manufacturing industry standards have been or are in the process to be published by the ASTM Intl. Two of the eight standards are being published with the support of the International Standardization of Organization. These combined standards are one example of the global support […]
Category: Newsletters Comments Off on Newsletter April 2014
-
SLS Parts & Valentine’s Day Trivia
February 13, 2015We had some room on the SLS platform so we added a few fun Valentine’s Day themed parts found on Thingiverse. Then I found another design… They still need some clean up, and a little color, but they will make fun key-chains. Download the Geared Heart File Here! Download the […]
Category: Newsletter, Photos
Tags: 3D Printing, Additive Manufacturing, Celtic Heart, Geared Heart, Polycarbonate, Rapid Prototyping, Rapid Prototyping Chicago, SLS, Thingiverse, Trivia, Valentine's Day | Comments (0) -
Met-L-Flo Kids – The Homework Advantage
January 2, 2015Talk about a simple homework assignment where dad takes over! Brian McNamara’s son recently had a science project due – this is what “he” turned in! How often do you see a 4th grader bring in a to scale model of NASA’s Mars Rover? This part was produced on our SLS (Selective Laser Sintering) machine. […]
Category: Home, Photos
Tags: 3D Printing, 4th Grade, Additive Manufacturing, Engineering, Homework, Manufacturing, NASA, Parts, Prototyping, Rapid Prototyping, Science Project, Select Laser Sintering, SLS | Comments (0) -
Boy Scouts Pack 331 Tour of Met-L-Flo
We recently had the pleasure of hosting Boy Scouts Pack 331. It was a fun evening, the boys had lots of questions, as did the parents. Everyone was able to see many different processes and appreciate some of the artistry of our production team.
Category: Home, Photos
Tags: 3D Printing, Additive Manufacturing, Boy Scouts, Pack 331, Tour | Comments (0) -
The Casting Process
Have you ever had a project where an SLA part wouldn’t fit the bill, but you weren’t sure which direction to turn next? There are many prototyping options available beyond plastic SLAs. If you need more than one of the same part, the casting process can be an excellent alternative. Met-L-Flo casts prototype pieces in […]
Category: Home, Photos
Tags: 3-D, 3D Printing, Additive Manufacturing, Casting, Concept, Design, Engineering, Manufacturing, New Products Industry, Prototyping, Rapid Prototyping, Silicone Molding, SLA, Sterolithography | Comments (0) -
Real World Applications of 3D Printing
As one would expect—day in and day out—use of equipment takes its toll. Preventative maintenance programs are a must, but at the end of the day… sometimes things just break. Recently, our liquid honing machine, started acting up. A honing machine looks a lot like a sand blast cabinet, but works through a combination of […]
Category: Home, Photos
Tags: 3-D, 3D Printing, Additive Manufacturing, Advanced Manufacturing Insight, CAD, Concept, Engineering, FDM, Manufacturing, Problem Solving, Rapid Prototyping, Reverse Engineering, Solutions | Comments (0)