1. Met-L-Flo, Inc. joins with IMEC Made in Illinois program

    September 29, 2016

       Met-L-Flo, Inc. has recently partnered with IMEC to join the Made in Illinois program which helps promote local Illinois manufacturers. To learn more about this organization visit our page on the IMEC website. We are very proud to represent such a prestigious group that promotes the growth of businesses in our state. http://www.imec.org/Met-L-Flo.cfm          

  2. Additive Manufacturing Conference

    August 22, 2016

    Additive Manufacturing Conference at IMTS 2016Met-L-Flo, Inc. would like to invite you to the Additive Manufacturing Conference that will be co-located with IMTS at McCormick Place in Chicago. This event will be taking place on September 13th and 14th at the same location as the International Manufacturing Technology Show. We will be a silver sponsor […]

  3. Press Release: Met-L-Flo Adds New ROMER Absolute Arm 3D scanner

    August 4, 2016

    Press Release Contact: marketing@metlflo.com For Immediate Release630-409-9860 August 3, 2016www.metlflo.comMet-L-Flo, Inc. – ROMER Absolute Arm IntroducedMet-L-Flo has acquired a new 3D scanning arm. The addition of a ROMER Arm for accurate measuring and performing multiple inspection services. This scanning device retrieves precise measurements with less user error. This Arm can measure any type of part with […]

  4. Met-L-Flo, Inc. introduces its new outside sales team

    July 6, 2016

     Jeff Duncan: Business Development Manager for the Southeast region            Jeff earned a degree in Engineering Design & Technology from the University of Central Florida. After college his interest in 3D Technology led him to help build a Rapid Product Development, Rapid Prototyping, and Additive Manufacturing/3D printing Firm called Mydea. He helped grow the company to […]

  5. The Polimotor 2 Composite Engine Case Study

    June 22, 2016

    The Polimotor 2 engine has been invented by renowned automotive innovator Matti Holtzberg owner of Composite Castings in Florida where the concept began over 30 years ago. The original Polimotor engine was far beyond its time in regards to composites technology and 3-D printing. It was not completely made of plastics but started a new […]

@metlflo

"Join us for an honest assessment of the career paths of these additive manufacturing experts! Our career chat forum… https://t.co/PoujJlHyY9"

"Join us at a virtual Additive Manufacturing Career Chat & 2020 Industry Awards tomorrow, November 19th, 2020 from 1… https://t.co/9wfAzy97vO"

"Production Acceleration with expanded materials. - https://t.co/Uj06ghAW30"

"Production  Acceleration - https://t.co/hz8LCNXBdC"

"Strengthen your supply chain. - https://t.co/5JcBgLKZUW"

View Summary

AS9100 Certified - ISO 9001:2008 RegisteredITAR Certified