Press Release: Met-L-Flo Adds New ROMER Absolute Arm 3D scanner

August 4, 2016

Met-L-Flo_Vector Silver with Ruler Lines - REDONE
Romer-Absolute-Arm-Intergrated-Scanner-M[1]Press Release Contact: marketing@metlflo.com
For Immediate Release
630-409-9860
August 3, 2016
www.metlflo.com

Met-L-Flo, Inc. – ROMER Absolute Arm Introduced


Met-L-Flo has acquired a new 3D scanning arm. The addition of a ROMER Arm for accurate measuring and performing multiple inspection services. This scanning device retrieves precise measurements with less user error. This Arm can measure any type of part with minimal alterations regardless of the material or shape. The touch probe component of the arm provides exacting CMM measurements from two points on a part based on where you make contact. The PolyWorks software option of the arm is one of the best on the market and makes reading the measurements easy and time efficient.
Producing quality is important to Met-L-Flo. Our expanded capabilities are in compliance and support of our Certifications. This includes our D6-51991 Digital Product Definition and related Model Based Definition compliances. The addition of this ROMER Arm to our facility will increase quality, response time and accuracy. This equipment advances the way our Additive Manufacturing (3D printing) process are applied at Met-L-Flo.

About Hexagon Manufacturing

Hexagon Manufacturing Intelligence helps industrial manufacturers develop the disruptive technologies of today and the life-changing products of tomorrow. As a leading metrology and manufacturing solution specialist, our expertise in sensing, thinking and acting – the collection, analysis and active use of measurement data – gives our customers the confidence to increase production speed and accelerate productivity while enhancing product quality.


Facebook-blue-round Google+-red-round Linkeden-blue-round Twitter-Blue-Round
We invite you to visit the site and give us your feedback by posting a comment to any of our social media pages.

About Met-L-Flo, Inc.: Since 1991, Met-L-Flo, Inc. has been creating solutions via 3D Printing, Additive Manufacturing and Bridge Tooling technologies for a variety of industries including: Aerospace, Defense, Consumer Products, Agriculture, and Industrial Equipment. Our commitment to quality is exemplified by our ISO 9001:2008, AS 9100C:2009-01, and ITAR #M34307 Certifications.

No Comments »

No comments yet.

RSS feed for comments on this post.

Leave a comment

@metlflo

"Getting ready For #RAPIDevent! Keep and eye out for our Tiger. Made in Whitmix on #carbon. Hope to see you all th… https://t.co/OOit6TRluK"

"Reverse Engineering and Scanning for data capture and validation - https://t.co/2GjRvFSAjL https://t.co/h40IVLfYxr"

"Let's meet at RAPID + TCT - https://t.co/7jyXu6yF7l https://t.co/2BvcDuuKiq"

"Looking forward to representing Additive Manufacturing at the RAAN tomorrow. We hope to share what is possible and… https://t.co/jQboiWaM6P"

"Aerospace Symposium https://t.co/TEckeVckim kicks off tomorrow. Should be an interesting venue and we look forwar… https://t.co/QCaqAOBrNf"

View Summary

AS9100 Certified - ISO 9001:2008 RegisteredITAR Certified