1. AMUG Award

    Award Winning Master Chief!

    April 16, 2019

    At the Additive Manufacturing Users Group (AMUG) this April 3rd, MET-L-FLO tied for First Place with its entry of the “Master Chief”. Congratulations to Bill Braune and the team.    ” With a perfect mix of Carbon and Stereolithography it was awesome to see the marriage of old school versus new school working together in harmony.” said […]

  2. The Casting Process

    January 2, 2015

    Have you ever had a project where an SLA part wouldn’t fit the bill, but you weren’t sure which direction to turn next? There are many prototyping options available beyond plastic SLAs. If you need more than one of the same part, the casting process can be an excellent alternative. Met-L-Flo casts prototype pieces in […]

  3. IMTS 2014 Presentation by Carl Dekker, Part 8 of 8

    December 30, 2014

    Carl Dekker recently gave a presentation at IMTS 2014 – When and How to Work With a Service Provider Part 8 – Quality Requirements [youtube=http://youtu.be/VjtlQKi-wFE]

  4. IMTS 2014 Presentation by Carl Dekker, Part 7 of 8

    Carl Dekker recently gave a presentation at IMTS 2014 – When and How to Work With a Service Provider Part 6 – Communication [youtube=http://youtu.be/yskwvwcjGsM]

  5. IMTS 2014 Presentation by Carl Dekker, Part 6 of 8

    December 29, 2014

    Carl Dekker recently gave a presentation at IMTS 2014 – When and How to Work With a Service Provider Part 6 – Factors to Consider [youtube=http://youtu.be/Z9LD9AKLaUw]

  6. IMTS 2014 Presentation by Carl Dekker, Part 5 of 8

    Carl Dekker recently gave a presentation at IMTS 2014 – When and How to Work With a Service Provider Part 5 – Applications & Working Relationships [youtube=http://youtu.be/-nUzT_joSSg]

@metlflo

"Getting ready For #RAPIDevent! Keep and eye out for our Tiger. Made in Whitmix on #carbon. Hope to see you all th… https://t.co/OOit6TRluK"

"Reverse Engineering and Scanning for data capture and validation - https://t.co/2GjRvFSAjL https://t.co/h40IVLfYxr"

"Let's meet at RAPID + TCT - https://t.co/7jyXu6yF7l https://t.co/2BvcDuuKiq"

"Looking forward to representing Additive Manufacturing at the RAAN tomorrow. We hope to share what is possible and… https://t.co/jQboiWaM6P"

"Aerospace Symposium https://t.co/TEckeVckim kicks off tomorrow. Should be an interesting venue and we look forwar… https://t.co/QCaqAOBrNf"

View Summary

AS9100 Certified - ISO 9001:2008 RegisteredITAR Certified