Prototype Rotational Molding

Prototype Rotational Molding

For prototype rotational molding services, Met L Flo Inc. can mold and cast your model or part and create fast, cost effective products and parts for development and improvement. Our state-of-the-art facility can accommodate small to large pieces and we can provide castings in multiple materials to best suit your desired finish. When developing parts or products, the prototype rotational molding process can produce urethane molds that can be painted or metal coatings to give the look of the final product that can be completed in metal.

For more information on prototype rotational molding services, contact Met L Flo Inc. today at 1.800.MET.L.FLO or fill out the simple form on the right and one of our staff members will reach out to you as soon as we can. You can also email us anytime at info@metlflo.com and we will respond shortly.

What is Prototype Rotational Molding

Prototype rotational molding can be helpful in product development to make physical changes to the piece and then recast it. Prototype rotational molding is also helpful to determine the best material to use for the final molding of a part or product. Each run of a prototype rotational molding can be sanded, textured, even installed to best suit the application before finalizing the prototype.

Our state-of-the-art facility can accommodate small to large pieces

Prototype rotational molding involves a molding of a part or product and then a liquid material can be introduced into the prototype mold and rotated. The liquid material coats the inside of the prototype mold and creates a hollow casting. Since the prototype rotational molding is hollow, it becomes much less expensive in material cost compared to a solid casting of the same material.

The desired thickness of the material will determine the volume of material that gets introduced into the prototype rotational molding and will also effect the set time.

Types of Prototype Rotational Molding

 One Rotational molding type involves a chemical reaction of a urethane or polymer with two parts that when combined, heat up and solidify into a hardened material. The chemical reaction causes the heat so no external heat source is necessary. Another common rotational molding type is thermoplastic that involves heating a mold in an oven to melt the material that is introduced. Powders or beads can be placed in the prototype rotational molding that when heated up in an oven create a liquid that can be rotated bi-axially to coat the inside of the mold.

Prototype rotational molding can be helpful in product development to make physical changes to the piece and then recast it

Both prototype rotational molding types are effective and produce great products. The design flexibility of prototype rotational molding allows for complex geometry to be captured by a model and then cast in the molding process without repeated fabrication.

Additional Prototype Rotational Molding References

 Rotational Molding is also known as rotocasting or rotomolding. Once the prototype rotational molding has been heated and rotated, it can be cooled naturally with time or introduced into a cooling system. A cooling process expedites the production time for a prototype rotational molding making it very appealing.

Stress Free parts is one of the biggest appeals of the prototype rotational molding, should it be damaged or have an imperfection it can be corrected and a replacement can be cast without any further fabrication besides what was needed.

Get Started on Your Prototype Rotational Molding Project

To get started on your prototype rotational molding project with Met L Flo, give us a call now at 1.800.MET.L. FLO (800.632.5356). We welcome you to also fill out our easy-to-use form to the right and give as much detail as possible and one of our associates will collect the information and get in touch with you as soon as possible. Or email us anytime at info@metlflo.com.

We look forward to working with you on your prototype rotational molding project.

Have Questions?

We're more than happy to address any questions or concerns that you may have.

Contact Information






Additional Information

 

@metlflo

"Join us for an honest assessment of the career paths of these additive manufacturing experts! Our career chat forum… https://t.co/PoujJlHyY9"

"Join us at a virtual Additive Manufacturing Career Chat & 2020 Industry Awards tomorrow, November 19th, 2020 from 1… https://t.co/9wfAzy97vO"

"Production Acceleration with expanded materials. - https://t.co/Uj06ghAW30"

"Production  Acceleration - https://t.co/hz8LCNXBdC"

"Strengthen your supply chain. - https://t.co/5JcBgLKZUW"

View Summary

AS9100 Certified - ISO 9001:2008 RegisteredITAR Certified